Rohloff Splined Sprocket - 16T

Since 2016, Rohloff has equipped all hubs in the current series with a splined sprocket system. Turning or replacing a sprocket is then very easy without a chain whip or cassette removal tool. Due to the same component basis (screw connection), existing hubs can be retrofitted or converted with this splined system. 

Technical Information:

Material: Steel

Chainline: 57 mm

Manufacturer's Notice:

Due to the extended number of teeth, many chainring / sprocket combinations are possible. The permissible or desired transmission ratio can be determined with the Gears-Meters Table. In practice, a gear ratio (chainring: sprocket) of 2.5 - 2.8 has been proven to be suitable for touring/everyday use. However, if you are travelling off-road and in the mountains, you can choose your own individual gear ratio down to a minimum factor of 1.9.

Manufacturer Numbers:

13 tooth: 8541

14 tooth: 8542

15 tooth: 8543

16 tooth: 8544

17 tooth: 8545

18 tooth: 8546

19 tooth: 8547

21 tooth: 8549

Made in Germany